Syllabus

PHYS 3209: Electronics I

Spring 2027 · CRN #35359/35360 · 3 credit hours

Tuesdays and Thursdays, 3:30–6:15 PM ET · Boggs 1-18 · In-person attendance required

1 Course Description

This is a first course in both theoretical and applied electronics, built on a thorough grounding in circuit and device physics. It is a combined lecture and laboratory course: each meeting pairs short lectures with hands-on work at the bench.

In the lab, you will use a variety of electronics instruments and tools, including oscilloscopes, function generators, Moku:Go FPGA-based multi-instruments, soldering tools, and breadboards.

1.1 Prerequisites

PHYS 2212 or PHYS 2232, with a minimum grade of D.

1.2 Learning Outcomes

You will develop theoretical and practical expertise in basic circuit design, simulation, construction, and testing, including: DC and AC circuits, passive and active filters, diodes and transistors, operational amplifiers (op-amps), and digital circuits and microprocessors.

1.3 Required Course Materials

D. L. Eggleston, Basic Electronics for Scientists and Engineers, 2nd edition (Cambridge University Press, 2025). doi:10.1017/9781009622417

Lab guides, pre-lab exercises, and other course materials will be provided through the course website.

2 Instructor Information

Instructor Andrew J. Steinmetz
Email ajsteinmetz@gatech.edu
Office Howey W204
Office Hours By appointment

3 Course Modality Information

This is an in-person course with mandatory attendance. Lab work is done during the scheduled class time, and the equipment stays in the lab.

4 Assignments and Grading

There is no final exam in this course. Pre-labs, quizzes, and lab worksheets are submitted in class. Lab reports are submitted on Canvas in PDF format by 11:59 PM ET unless otherwise specified.

Course Component Weight
Labs 65%
Pre-lab exercises 10%
Quizzes 25%
Total 100%

4.1 Assignment Descriptions

The labs are organized into modules. In each module, you prepare with a pre-lab exercise due prior to the lab session, work through the lab guide and worksheet with your lab partner during class, and then write an individual lab report outside of class.

  • Labs: Each lab grade is based on your completion of the in-class lab worksheet together with the lab report you submit for that module. Scores are assigned to lab reports: if you complete the lab work but do not submit a report, you earn zero for that lab.
  • Pre-lab exercises: Short exercises that prepare you for the next lab session. Each is due before the start of the session it prepares you for. Your lowest pre-lab score is dropped.
  • Quizzes: Short quizzes on the lecture material, readings, and labs. Your lowest quiz score is dropped.

The schedule of lab modules, quizzes, and due dates will be posted on the course website.

4.2 Grading Scale

Your final grade will be assigned as a letter grade according to the following scale:

Letter Grade Percentage
A 90–100%
B 80–89%
C 70–79%
D 60–69%
F 0–59%

Final numeric grades are rounded to the nearest whole percent. For example, 83.76% becomes 84%. This course is not otherwise curved. At Georgia Tech, grades are awarded on a scale of A–F with no plus/minus grades permitted.

Georgia Tech grading system

5 Course and Institution Policies

5.1 Attendance

Lab attendance and active participation in the lab work are required. Most of the work in this course happens at the bench during class, so please attend every scheduled meeting on time. If you will miss a class for any reason, please let your instructor know by email as soon as possible, preferably before the session.

To request an excused absence, contact the Dean of Students office for class absence verification in the case of a documented illness, hospitalization, accident, death in the family, or family emergency.

Dean of Students: Class Attendance

5.1.1 Missed and Late Work

Important

In-class lab worksheets, pre-lab exercises, and quizzes cannot be made up and are not accepted late. If you miss one because of a valid absence documented by the Dean of Students or via an institutionally approved absence, it is excused and left out of your grade. Your lowest pre-lab and lowest quiz scores are dropped, which covers one missed pre-lab and one missed quiz for any other reason.

Lab reports submitted late are marked down 20%. Lab reports submitted more than one week after the due date receive zero credit.

Exceptions to these rules are made only through the Dean of Students office.

5.2 Lab Conduct and Safety

  • Treat the equipment with care, and report any damaged or malfunctioning equipment to the instructor or TA right away.
  • Soldering irons are hot enough to cause serious burns. Return the iron to its stand whenever it is not in your hand, and follow all safety procedures.
  • No food or drink at the lab benches.
  • Before you leave, power down your instruments and return tools and components to where you found them.

5.3 Collaboration and Group Work

You work with a lab partner at the bench. The protocol is to take data together, work through the lab worksheet together, share your research and external resources, and discuss the experiment and results, as you would in a research team. All work (such as pre-lab exercises, in-class worksheets, and lab reports) is written individually (including text, tables, and figures).

For lab reports, if for any reason you use lab data (raw data only — not analysis or figures) that you were not personally involved in acquiring, you must disclose it via a Data Disclosure section at the end of your report stating the origin of the data. Failure to do so constitutes academic misconduct. Externally obtained reference values should be properly cited.

5.4 Academic Integrity

Georgia Tech aims to cultivate a community based on trust, academic integrity, and honor. Students are expected to act according to the highest ethical standards.

Any student suspected of cheating or plagiarism on a quiz, pre-lab exercise, lab worksheet, or lab report will be reported to the Office of Student Integrity, who will investigate the incident and identify the appropriate penalty for violations.

Georgia Tech Academic Honor Code

Georgia Tech Student Code of Conduct

5.4.1 Generative AI Use and Disclosure

Generative AI tools (such as ChatGPT, Claude, Gemini, and Copilot) are permitted only on lab reports, under an AI policy based on that of the American Physical Society (APS) (updated June 2026). AI use is entirely optional; you are never required to use it.

  • You are accountable. You are fully responsible for every sentence, number, equation, figure, schematic, and reference in your report, whether or not AI helped produce it. Check all AI output before you use it.
  • Light editing needs no disclosure. Spelling, grammar, punctuation, and trimming wording you wrote yourself.
  • Substantive use must be disclosed. Analysis code, calculations, figures, literature search, or feedback on drafts. Disclose it in an AI Disclosure section at the end of your report, naming the tool and version, what it did, how you directed it, and how you verified the output.
  • Not permitted, disclosed or not: using AI on pre-lab exercises, in-class lab worksheets and bench work, or quizzes; generating or altering data; having AI write your report or its sections; or citing sources you have not read.

Undisclosed substantive AI use, or any of the unpermitted uses above, may be treated as a violation of Georgia Tech’s academic integrity policies. When in doubt, ask before you submit.

Georgia Tech OIT guidance on AI

APS guidance on AI for Authors

5.5 Accommodations for Students with Disabilities

If you are a student with learning needs that require accommodation, contact the Office of Disability Services, often referred to as ADAPTS, at (404) 894-2563 or through the Office of Disability Services website as soon as possible to make an appointment to discuss your needs and to obtain an accommodations letter.

Georgia Tech Office of Disability Services

5.6 Student-Faculty Expectations

At Georgia Tech, we believe that it is important to strive for an atmosphere of mutual respect, acknowledgment, and responsibility between faculty members and the student body.

In the end, simple respect for knowledge, hard work, and cordial interactions will help build the environment we seek. Therefore, I encourage you to remain committed to the ideals of Georgia Tech while in this class.

Georgia Tech student-faculty expectations